HOME SPECIALS MANUALS TERMS AND CONDITIONS JAKOBS TOOLS FAQ CONTACT US
PROFESSIONAL MINIATURE TOOLS
MICRO Woodturning Lathe DB 250
Ideal for turning pens or dollhouse items such as cups, plates, pots, vases and columns. Model railroad items include power and signal posts and tanks. Doll and marionette limbs as well as thousands of classical model building items may be turned with ease.
Technical data:
Centre Distance 9 27/32" (250 mm)
Max Power 1/5 hp (150 W)
Swing Distance 1 35/64" (40 mm)
Volts 110 - 120 V AC, 50/60 Hz
Tailstock travel 3/4" (20 mm)
Weight 5.5 lb (2.8 kg)
Speed 1,000 to 5,000 rpm
Includes 6 collets 5/64", 7/64", 1/8", 15/64", 5/16" and 13/32" (2, 3, 4, 6, 8, 10 mm) and faceplates for both headstock and tailstock.
NO 37 020
1. Spindle runs in a ball bearing assembly with a through-going bore of 13/32" (10 mm) for serial production of small parts (requires the use of collets when holding work piece).
2. Stable tool rest adjustable in height and turning through 360°.
3. Faceplate for attaching bigger sized work pieces is included.
4. Quiet motor with long lifetime.
5. Sturdy bed made from aluminum profile.
6. Tailstock with live center.
7. 4-pointed dog with 3/8" (10 mm) shank.
The tool rest is conveniently adjustable in height as well as it turns through 360°, allowing also for centerless tuming. As shown here when working with the faceplate (the work piece is fixed on the faceplate with regular woodscrews).
Adding final touches with paint to your work piece at lower speeds - easily done through the electronic speed control!
Alternatively clamping the work piece with collets
A set of six collets in sizes 2 - 3 - 4 - 6 - 8 and 10 mm (5/64" - 1/8" - 5/32" - 15/64" - 5/16" - 13/32") is included.
Five piece HSS chisel set
Highest quality set with the most frequently used chisels: tube chisel, flat chisel, pointed chisel, anvil chisel and finishing chisel. Neatly packed in a wooden box.
NO 27 023
Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5.0 mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
NO 27 028
Independent Four Jaw Chuck for DB 250
Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 0 to 1 3/8" (0 to 35 mm) inside and 35/64" to 2 5/8" (14 to 67 mm) outside. The DB 250 headstock spindle of thread M16 x 1 screws directly into the chuck.
NO 27 024
Three Jaw Chuck for DB 250
Used for concentric clamping. Made from zinc diecast and offering 1/16" to 1 13/32" (1.5 to 32 mm) and 1/2" to 2 19/32" (12 to 65 mm) when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 spindle.
NO 27 026
Item #
|
Description
|
Our Price
|
Qty
|
Add to Cart
|
37020
|
MICRO woodturning lathe DB 250
|
$205.20
|
||
27023
|
Five piece turning tool set in box
|
$52.20
|
||
27028
|
Drill chuck for tailstock of DB 250
|
$19.35
|
||
27024
|
Four jaw chuck for Micro woodturning lathe DB 250
|
$39.15
|
||
27026
|
Three jaw chuck for the lathe DB 250, used for concentric clamping
|
$58.50
|